This conversion is a traditional “VW Camper” design. It is designed for medium to long trips and offers a comfortable nights sleep with its flat “Rock and Roll “ type seat bed. The conversion has the advantage of plenty of storage space – needed on a longer trip while still offering spacious “lounge” sitting.The design can also be fitted with either a swivel seat to the passenger seat, or we can build in additional bench seating with integral storage behind the passenger seat enabling 4 people to sit around a central table.
£5,250 inc vat
To Include
Fridge - 50 litre Waeco CF-50 12v compressor with Ice-box and battery protection Sink - (With external outlet) – Stainless steel smev sink, with darkened glass protective lid. Hob - Stainless steel Smev twin hob with darkened glass protective lid and 904 gas regulator. Water - 20L, In-line submersible pump, external outlet 12v micro-switched tap. Electric hook-up - With flush external power inlet. Built in RCD with 2 three pin socket and 15m cable. Zig Power distribution unit - Offering 240 to 12v power inversion, split relay alternator charging and 240v, 18 amp mains batttery charging, three fused power outlets and battery condition monitor. Storage – plenty of storage space both for food and clothing, including a corner closet. Rock and Roll seat Bed - Includes two shoulder belts. A versatile layout easily converted to a flat six foot bed. Four inch cushions - with quality coverings in a choice of colours. Underseat storage tray on bearing runners for maxinum use of space. Top locker storage with integral downlighters- ideal for tea, coffee and biscuits. Passenger swivel plate or bench seat storage unit allowing 4 people to sit around the central table. 12mm hard flooring with non-slip vinyl covering. 12v power outlet 12v LED low power light 85 amp leisure battery with battery tray, clamps, and split relay charging. Stow-a-way table - rail mounted with hinged leg Fire extinguisher Choice of finishes
When fitting this conversion to panel vans prices may vary according to the initial starting point of the conversion work. For example if your vehicle has no windows and no lining or insulation then additional costs will be about £1200 inc vat for full rear lining, insulation and two fixed bonded tinted windows.
