|
Mercedes Vito Campervan Conversions - Tourer Design
As well as having a good width the Vito also benefits from twin sliding doors, something that can be put to good use as a campervan. The full side conversion has good access through both doors (if required) which really opens up the space with in the van, the extra sliding door also means that additional storage and access can be incorporated, into what would otherwise be difficult to reach cupboards. The design comes with either a swivel seat fitted to the passenger seat, or we can build in additional bench seat with integral storage behind the passenger seat enabling 4 people to sit around a central table. An Important design feature of the conversion is the ability to access the fridge and nearly all of the storage lockers while the bed is down. Meaning you won't have to struggle to make a cup of tea in the morning.
We now have a slimline camper conversion design which we are able to fit into VW Transporter, Mercedes Vito, Renault Trafic and other similar sized conversions. This is approx 5 inches narrower than the standard conversion allowing for extra seat and bed width. Please enquire for details.
£5,750 inc vat
To Include
- Fridge - 50 litre Waeco CF-50 12v compressor with Ice-box and battery protection
- Sink - (With external outlet) – Stainless steel smev sink, with darkened glass protective lid.
- Hob - Stainless steel Smev twin hob with darkened glass protective lid and 904 gas regulator.
- Water - 20L, In-line submersible pump, external outlet
- 12v micro-switched tap.
- Electric hook-up - With flush external power inlet. Built in RCD with 2 three pin socket and 15m cable.
- Zig Power distribution unit - Offering 240 to 12v power inversion, split relay alternator charging and 240v, 18 amp mains batttery charging, three fused power outlets and battery condition monitor.
- Storage – plenty of storage space both for food and clothing, including a corner closet.
- Premier Rock and Roll bed with power coated frame, mechanical latch and air-ram assisted close. - Includes two shoulder belts. A versatile layout easily converted to a flat six foot bed.
- Four inch cushions - with quality coverings in a choice of colours.
- Underseat storage tray on bearing runners for maxinum use of space.
- Top locker storage with integral downlighters- ideal for tea, coffee and biscuits.
- 12mm hard flooring with non-slip vinyl covering.
- 12v power outlet
- 12v LED low power light
- 85 amp leisure battery with battery tray, clamps, and split relay charging.
- Stow-a-way table - rail mounted with hinged leg
- Fire extinguisher
- Choice of finishes
-
- When fitting this conversion to panel vans prices may vary according to the initial starting point of the conversion work. For example if your vehicle has no windows and no lining then additional costs will be £1200 inc vat for two bonded fixed windows, ply-lining, insulation, and wall and ceiling carpeting throughout.
- We are able to offer various seating up-grades including front swivel seating and rear TUV approved seating systems including the RIB Altair.
|
