Mercedes Vito - Familyvan

Mercedes Vito campervan Conversion - Familyvan design

The Familyvan conversion is a flexible 2-5 berth design combining facilities, versatility of and space.  The Familyvan conversion can be made up to 6 berth with the addition Reimo elevation roof and cab bunk. The design is available in a couple of variations along the same theme -that is to have the facilities tucked away at low level while giving a large seat and bed area. Seating options can include either a 3 seater quick release seat or a 2 seater rock and roll seat

£4,500 inc vat

To Include 

• New 3 Seater quick release seat system 
• Two swivel plates fitted to front seats - new passenger seats supplied at request
  
• Underseat storage unit on bearing runners.
• Smev stainless steel twin hob with glass cover/splash back.
• 40l compressor  drawer fridge fitted underneath seat or 40l top-opening compressor fridge fitted into side unit.
• 12mm solid flooring with a choice of non-slip finishes.
• Electric hook-up with flush fitting inlet, RCD protection and triple socket outlet.
• Leisure battery with split-charge wiring loom.
• Top-locker storage with integral LED downlighters
• Low level storage units with up-holstered tops at rear or down off-side
• Low power LED striplighting.
• 12v cigarette type outlet connected to leisure battery
• Stow-a-way or free-standing table

Optional extras

£3,750

Reimo Elevation roof, strengthening kit, full trimming and lining.
Reimo roof bed  and mattress with air-ram assisted raise and lower

When fitting this conversion to panel vans prices may vary according to the initial starting point of the conversion work. For example if your vehicle has no windows and no lining then additional costs will be £1200 inc vat for two bonded fixed windows, ply-lining, insulation, and wall and ceiling carpeting throughout.